I Have a Research Support System

On Thursday afternoon, the material is on the first floor.

"How many times have I said that when drawing a picture, use size 36 for physical quantities and units, and use size 26 for numbers on the coordinate axes. Every drawing must conform to this standard, and consistency must be maintained!"

Xu Qiu walked in the corridor, and could hear Teacher Wei's voice from a long distance away, coming from the laboratory.

"There are also these two pictures. The illustration of this picture is so big, and the picture of that picture is so small. Change them to the same size!" Teacher Wei said to Chen Wanqing with a straight face.

Seeing Xu Qiu come in, Teacher Wei softened his tone a little:

"Xu Qiu, here we come."

"Hello, Teacher Wei." Xu Qiu said.

"After changing those pictures, show them to me."

"Be strict with yourself!"

Teacher Wei turned his head and gave some instructions to the senior sister, then left and went back to the office.

"Hmm..." Chen Wanqing nodded weakly.

"It seems that I did something wrong again, and I was raped by Teacher Wei, but I can't help, so let's not bother her." Xu Qiu thought to himself, and then he said to Chen Wanqing:

"Sister, come on, I'm going to wash the substrate first."

Last time, due to lack of time, the proficiency of cleaning the substrate was still at the third level.

Today Xu Qiu decided to raise it to the fourth level and complete the task.

…………

An hour and a half later.

With the lessons learned last time, Xu Qiu didn't clean too many substrates.

In the end, 24 washed and blow-dried substrates were obtained, just filling two Petri dishes.

Open the system to check the proficiency:

【Scientific Research Auxiliary System】

Privilege Level: 1

Points: 178

Tasks in progress: 1

Proficiency:

【Experimental operation class】

Clean the substrate (third stage 80%/fourth stage 50%)

【Instrument Equipment Tools】

Ultrasonic cleaner (fourth stage 80%/fifth stage 0%)

Tweezers (third order 88%/fourth order 50%)

Nitrogen Gun (Tier 3 80%/Tier 4 50%)

【Special class】

Literature reading (Level 72%/Level 50%)

##

Document reading proficiency has increased by 5%, which is the result of Xu Qiu's hard work for an hour last night.

Now he has set a small goal for himself, reading literature for 1 hour every day.

Experimental operations can be improved quickly with the help of the system, but literature reading takes time to accumulate.

Moreover, he will definitely have to write a thesis by himself in the future, so he can lay a solid foundation first.

The proficiency of tweezers and nitrogen guns improved faster in the early stage, but now it is much slower.

The tweezers are still 12% short of the fourth order, and the nitrogen gun is still 20% short.

Is there any way to quickly increase proficiency?

Looking at the cleaned substrate in front of him, Xu Qiu had an idea and came up with a brilliant idea:

First prepare a box with isopropyl alcohol;

Then pick up a cleaned substrate with tweezers;

Then immerse the substrate in isopropanol;

Finally, clamp the substrate out with tweezers and dry it with a nitrogen gun.

He tried it once.

[Tweezers proficiency +1%]

[Nitrogen gun proficiency +1%]

It really works!

In this way, the ultrasonic cleaning step can be skipped, and the proficiency of brushing tweezers and nitrogen gun can be directly brushed.

Efficiency instantly increased by hundreds of percent!

He hurried on to try.

Pinch, soak, clip out, blow dry.

[Tweezers proficiency +1%]

[Nitrogen gun proficiency +1%]

Pinch, soak, clip out, blow dry.

...

Hey, why didn't you increase your proficiency this time?

Could it be that the system found that I was using a BUG and fixed it?

Xu Qiu thought about it for a while, and felt that it was unlikely. The system did not prompt the violation, so it should be acquiescing to such behavior.

He carefully recalled the experimental operation just now.

In order to quickly brush up the proficiency, it seems that the operation just now was somewhat modified. Under the action of the airflow, the substrate trembled and almost flew out.

Is it because the system judged that the operation level was too poor, so the proficiency was not given?

He thinks it is very likely that this is the reason.

However, there is another possibility, that is, a few tenths of proficiency was added just now, but it was not shown because the addition was too little.

Which is the specific reason, just try it out.

Xu Qiu turned on the auxiliary system, compared with the holographic image, and imitated it earnestly.

Ten operations were performed in a row without a single mistake.

【Tweezers proficiency +1%】*10

【Nitrogen gun proficiency +1%】*10

This shows that only experimental operations that reach a certain standard will increase proficiency.

Furthermore, Xu Qiu deduced that the judgment mechanism of the system should be as follows:

When he makes an experimental operation, the system will give a practical score, assuming that the score is between 0 and 5;

And his current proficiency will correspond to a benchmark score, assuming that from the first level 0% to the fifth level 100%, corresponding to 0 to 5 points respectively;

If the practical score is greater than the benchmark score, the proficiency will be increased, and the increase is proportional to the difference between the two; otherwise, the proficiency will not be increased.

"System, is my reasoning correct?"

【correct. 】

"System, can I install a plug-in that can display the score of my every operation in real time?"

[The current permission level is insufficient, the request is rejected. 】

Seeing this, Xu Qiu had no choice but to continue the experiment.

He performed another ten operations in a row.

【Tweezers proficiency +1%】*9

【Nitrogen gun proficiency +1%】*9

This kind of concentrated operation was very energy-consuming, and by the last time, he found that he could no longer concentrate.

This caused the tweezers in his hand to shake, and the substrate almost flew out. Although the substrate did not fall in the end, the slightly flawed operation was not recognized by the system, and the proficiency did not increase.

Fortunately, the proficiency has reached the fourth level.

Xu Qiu looked at the system page:

【Scientific Research Auxiliary System】

Privilege Level: 1

Points: 478

Tasks in progress: 1

Proficiency:

【Experimental operation class】

Clean the substrate (fourth stage 1%/fourth stage 50%)

【Instrument Equipment Tools】

Ultrasonic cleaner (fourth stage 80%/fifth stage 0%)

Tweezers (fourth order 9%/fourth order 50%)

Nitrogen gun (4th stage 1%/4th stage 50%)

【Special class】

Literature reading (Level 72%/Level 50%)

[The task has been completed, and 300 points have been obtained. 】

[Acquire novice task IV. Raise the proficiency of any two experimental operations to level 4 or above, and reward 500 points for completing the task. 】

The task is complete, he does not intend to continue to improve the proficiency of tweezers and nitrogen gun.

While brushing is possible, it's not necessary.

On the one hand, he found that after the proficiency has been raised to the fourth level, some muscle memory has been formed in the experimental operation. Under normal operation, the error rate can basically be controlled within 5%.

It would take a lot of time and energy to continue brushing proficiency, and it doesn't make much sense to reduce the error rate to 4% or 3%.

On the other hand, the proficiency copied from the senior is only 50% of the fourth level, so his current upper limit is also around 50% of the fourth level.

If you continue to brush, you will soon enter the bottleneck period. It is better to improve naturally when doing experiments.

As for spending points to increase the upper limit to the fifth level, there is not much need.

Good steel should be used on the blade, and tweezers and nitrogen guns are at best a pattern engraved on the handle.